Makeup Brush Cosmetic Brushes Set with Case (7pcs) [EMAKEUP18]

:
Descirption:

Do you want to catch more attention? Do you want to have more glamour?? I dare say, the answer is “Yes”! Then, girls, please look at here, these makeup brushes can make your dream come true, you will become the focus no matter where you are!!!They are no harm for your skin, so please be assured to use them.

Specifications:

• High-quality 7-piece makeup brush set is an essential for the professional artist; it includes 1 powder brush, 1 eyebrow brush, 1 lip brush, 2 eye-shadow brushes, 1 eyebrow comb brush and 1 case
• Cosmetic brushes are the most important beauty tools
• Each cosmetic brush in this 7-piece set is individually handmade
• Makes a great starter set for all your basic makeup needs
• Durable case included to keep your makeup brushes protected
• It makes you feel good knowing that you are the best
• Material: Pure Natural Wool Hair
  Customer Tips:
• How to Clean Makeup Brushes Step by Step
• Washing your makeup brushes frequently can help keep your face and skin clean and healthy. Makeup brushes can often harbor lots of dirt and bacteria, which can be easily removed by following the steps listed below.
• Step 1
• You can use store brought brush cleaner, normal shampoo, vinegar, make-up removers or antibacterial hand soap to clean the bristles of your brushes.
• Step 2
• To start, run the brush under hot water to rinse off any caked on make-up. Do this for a minute, holding the brush at a downward angle, so that the water runs down the bristles rather than back along the handle.
• Step 3
• If using store brought brush cleaner, spray the liquid onto the brush, and follow any directions on the bottle.
• If using vinegar, make a mixture of 2 parts vinegar, 1 part water, and soak the bristles for 2-3 minutes.
• If using make-up remover or hand soap, please use one that is of a gel or cream consistency. Squirt a small amount onto the bristles and lightly massage it in, being careful not to scrub. Let the remover sit for 2-3 minutes.
• Step 4
• Once the time is up, run the brush under hot water once again to rinse. Pull the brush out of the water, and squeeze the bristles lightly between thumb and forefinger from the base to the tip to remove any excess water. Repeat the process if you are unsure if all the soap or cleaner has been removed.
• Step 5
• Lightly squeeze the brush with a washcloth to remove as much water as possible, then leave the brush flat on its side, or stand it up in a brush holder to dry.

Package Details:

1. 1 x Case
2. 1 x Powder Brush
3. 1 x Eyebrow Brush
4. 1 x Lip Brush
5. 1 x Eye-Shadow Brush
6. 2 x Eye-Shadow Brushes
7. 1 x Smudger Brush

Lens Hood for Canon PowerShot SX30 SX20 SX10 IS LH-DC60 [ECAMR120]

:
Descirption:

This flower lens hood shades the lens from stray light, and improves your contrast and image quality; in inclement weather, it can assist in keeping moisture or wind-blown debris off the lens; and it protects the front barrel from the inevitable impacts against walls, door frames, and other real-life obstacles.

Specifications:

• Features:
• Prevents glare and lens flare caused by unwanted light.
• Jazzes up your photos with richer colors and deeper saturation.
• Flower shaped design reduces vignetting effect.
• Protects your lens from minor impact.
• Twist-lock mounting for extra security.
• Can be attached in the opposite direction for storage.
• The quality lens hood is made very solid and strong.
• 
  
• Specifications:
• Color: Black
• Material: ABS
• Compatible with: Canon PowerShot SX1IS, SX1 IS; Canon PowerShot SX10IS, SX10 IS; Canon PowerShot SX20IS, SX20 IS; Canon PowerShot SX30IS, SX30 IS
• Product Size: 69x25mm (D x H)
• Product Weight: 4g

Package Details:

1. 1 x Lens Hood for Canon

Replacement Stylus Pen with Strap for iPhone 3G/3GS/4 (Black & Silver) [ETPEN004]

:
Descirption:

This Replacement Stylus is for iPhone. It features good quality and competitive price. It's a useful tool.

Specifications:

• As good size as your cell phone
• Made of good material
• Best and Timely Service

Package Details:

1. 1 x pen

Aputure Camera Battery Grip BP-D10 for Nikon D300 D300S D700 [ECAMR84]

:
Descirption:

Aputure Camera Battery Grip is powerful, versatile, and comfortable, and extends the battery life of your DSLR camera.

Specifications:

• Features:
• Powerful, versatile, and comfortable.
• Extends the battery life of your DSLR camera.
• Offers a secondary shutter release button for vertical and portrait photography.
• Includes special function buttons for more shooting options.
• Makes vertical shooting possible.
• Shutter button, AF-ON, Control wheels, etc.
• It comes with a tripod mounting thread as well.
• Uses one EN-EL3e, EN-EL4a, or EN-EL4 rechargeable Li-ion battery or 8 AA batteries (batteries not include).
• Gets the certification of FCC, CE, and RoHS.
• 
  
• Specifications:
• Color: Black
• Compatible With: Nikon D300, D300S, D700
• Working Temperature: 0 ~ +40 degrees Celsius
• Product Size: 15 x 5.2 x 7.6cm (L x W x H)
• Product Weight: 234g

Package Details:

1. 1 x BP-D10 Battery Grip (with BP-EL3e Holder for EN-EL3e Batteries)
2. 1 x BP-EL4 Battery-Chamber Cover
3. 1 x AA Battery Holder
4. 1 x User Manual

Aputure Black Vertical Battery Grip BP-D11 For Nikon D7000 DSLR Cameras [ECAMR58]

:
Descirption:

Aputure Camera Battery Grip for Nikon D7000 can hold one EN-EL15 battery or six AA batteries to extend the battery life of your DSLR camera. It is powerful, versatile, and comfortable.

Specifications:

• Features:
• Powerful, versatile, and comfortable.
• Extends the battery life of your DSLR camera.
• Offers a secondary shutter release button for vertical and portrait photography.
• Includes special function buttons for more shooting options.
• Makes vertical shooting possible.
• Shutter button, AF-ON, Control wheels, etc. (depending on model).
• Holds one EN-EL15 battery or six AA batteries (batteries not include).
• Compatible with Nikon D7000.
• 
  
• Specifications:
• Color: Black
• Power sources: One EN-EL15 battery or 6 AA/LR6 alkaline batteries or EH-5a AC Adapter
• Working Temperature: 0 - +40 degree Celsius
• Product Size: 13.3 x 4.3 x 6.5cm (L x W x H)
• Product Weight: 200g

Package Details:

1. 1 x Battery Grip for Nikon D7000
2. 1 x Battery Holder for AA Batteries
3. 1 x Battery Holder for EN-EL15 Battery
4. 1 x User Manual

3D Color Emboss Pattern Back Case Cover for iPhone 4 [EIPCASE589]

:
Descirption:

Want a unique hard case cover for your cell phone? Protect and personalize your cell phone with this back case cover. Made of high quality it can give your phone the ultra-protection from scratch and damage. Back case cover has openings for volume/side buttons, camera lens, charger jack and speakers which allows access to all phone functions. This stylish back case cover is the perfect choice for you! Then it is also a best decoration for mobile phone!

Specifications:

• * Protect and personalize your cell phone with this hard plastic back case cover
• * Hard plastic was reinforced to the front edges, sides and back of the phone to endure the life of this back case cover
• * Skin-tight, High quality, Durable and Stylish
• * Shield case has openings for volume/side buttons, camera lens, charger jack and speakers which allows access to all phone functions
• * All interface, ports and buttons available for directly use
• * Material: PC Plastic
• * Dimension: 58mm x 115mm x 9mm (W x H x S)

Package Details:

1. 1 x 3D Color Emboss Pattern Back Case Cover for iPhone 4

Rabbit 3D Crystallized Hard Back Case for iPhone 4 [EIPCASE578]

:
Descirption:

An absolutely beautiful, Exotic and elegant Crystal case for your Apple iPhone 4 multimedia phone that will get everyone's attention and admiration where ever you go. Its Stylish graphics and design make your iPhone blinking in parties and any gatherings. You can’t resist the temptation of this gorgeous 3D Case!

Specifications:

• * Perfectly fits your Apple iPhone 4
• * Each crystal is hand-set individually with high quality binding agents which will neither whiten the crystals nor influent light reflection of them
• * High-quality & Durable Polycarbonate constructed base case, easy access to all controls & ports
• * Prevents and shields your device from scratches, bumps and dust
• * As for replacement, spare Swarovski crystals will be supplied for you
• * Each iPhone faceplate case will be well packaged in gift box and provided with a pouch
• * Bring you a 3D effect
• * Dimension: 12cm x 6cm (L x W)
• * Available Color: Purple, White, Pink

Package Details:

1. 1 x Rabbit 3D Crystallized Hard Back Case for iPhone 4

Universal Replacement Metal Stylus Pen for iPhone 3G/3GS/4 (Color Assorted) [ETPEN002]

:
Descirption:

This Universal Replacement Metal Stylus is for iPhone (Color Assorted). It is designed in a high quality material and made by fine workmanship, you can write fluently on your cellphone and there is no need to worry about hurting the screen. The special processing tool is ideal to protect your phone screen.

Specifications:

• Dimensions: 3.74 in x 0.39 in x 3.74 in
• Color Assorted
• Universal Replacement Metal Stylus Pen for iPhone 3G/3G/4S

Package Details:

1. 1 x pen

Aputure Black Vertical Battery Grip BP-D11 For Nikon D7000 DSLR Cameras [ECAMR58]

:
Descirption:

Aputure Camera Battery Grip for Nikon D7000 can hold one EN-EL15 battery or six AA batteries to extend the battery life of your DSLR camera. It is powerful, versatile, and comfortable.

Specifications:

• Features:
• Powerful, versatile, and comfortable.
• Extends the battery life of your DSLR camera.
• Offers a secondary shutter release button for vertical and portrait photography.
• Includes special function buttons for more shooting options.
• Makes vertical shooting possible.
• Shutter button, AF-ON, Control wheels, etc. (depending on model).
• Holds one EN-EL15 battery or six AA batteries (batteries not include).
• Compatible with Nikon D7000.
• 
  
• Specifications:
• Color: Black
• Power sources: One EN-EL15 battery or 6 AA/LR6 alkaline batteries or EH-5a AC Adapter
• Working Temperature: 0 - +40 degree Celsius
• Product Size: 13.3 x 4.3 x 6.5cm (L x W x H)
• Product Weight: 200g

Package Details:

1. 1 x Battery Grip for Nikon D7000
2. 1 x Battery Holder for AA Batteries
3. 1 x Battery Holder for EN-EL15 Battery
4. 1 x User Manual

YONGNUO RF-602/C3 Wireless Remote Control for Canon 1D 1DS 5D2 50D [ECAMR131]

:
Descirption:

You can easily achieve flash trigger as well as wireless shutter function by using a pair of RF-602 transmitter/receiver.

Specifications:

• Features:
• Using a global free FSK 2.4GHz wireless channels which can be suitable in many countries.
• 2.4GHz band-16 selectable operating frequencies for eliminating interference.
• Remote control distance range is up to 100m.
• When using the special flashgun of Canon, the shutter synchronization speed reaches 1/250s.
• The RF-602 transmitter/receiver pair may be used to trigger all studio flash units employing a standard phone jack or mini phone jack sync input.
• 3.5mm mini phone jack and 6.35mm full size sync jack adapter are provided.
• 
  
• Specifications:
• Brand: YONGNUO
• Model: RF-602/C3
• Type: FSK 2.4GHz wireless remote system
• Transmitter Distance: 100M
• Flash Sync Speed: 1/250s
• Channel: 15 different channels and All channels
• Release: Half-way press, full-way press
• Transmitter Terminal: PC 3-Pin input terminal
• Receiver Terminal: Yongnuo 3-pin output terminal
• Time Of Shooting: Up to 20000 times (using 1x CR2 Lithium battery)
• Receiver Stand-by Time: Up to 45 hours (using 2 x AAA batteries)
• Color: Black
• Transmitter Size: 38.4 x 48 x 27mm (W x H x D)
• Receiver Size: 33 x 78 x 26mm (W x H x D)
• Transmitter Weight: 24g
• Receiver Weight: 33g

Package Details:

1. 1 x RF-602/C3 Transmitter
2. 1 x RF602/C3 Receiver
3. 1 x 3.5mm PC Sync Cable
4. 1 x 6.35mm Connector
5. 2 x AAA Batteries for Receiver
6. 1 x CR2 Lithium battery for Transmitter
7. 1 x User Manual

Universal Travel Battery Charger for Ni-MH/Ni-CD/LIR123A/AA/AAA [ECAMR137]

:
Descirption:

This universal battery charger is powerful. It can charge Ni-MH, Ni-CD, 18650, 16340, 14500, LIR123A, AA, AAA, C, D batteries.

Specifications:

• Features:
• High quality with good performance.
• Slim and portable design.
• Designed to charge your batteries quickly and safely.
• Can adjust automatically when charge different batteries types.
• With a indicator light, when charging, it turns red. After finished, it turns green.
• After finish, it can stop charging intellectively.
• Suitable for charging Ni-MH, Ni-CD, 18650, 16340, 14500, LIR123A, AA, AAA, C, D batteries.
• Compact and lightweight, easy to carry.
• 
  
• Specifications:
• Input: AC100-240V/47-63HZ
• Output: 1.2V/370MA, 3.6V/320MA, 9V/120MA
• Plug Standard: EU
• Battery Quantity Per Charge: 1 piece
• Supported Battery Size: Length up to 69mm, Diameter up to 33mm
• Supported Battery Types:
• All kinds of 3.6/3.7V lithium batteries, such as LIR123A, 18650, 14500, 16340 and so on; all kinds of 1.2V MH-Ni batteries, such as D, C, AA, AAA, 9V batteries and so on
• Color: Black
• Product Size: 100 x 42 x 32mm (L x W x H)
• Product Weight: 46g

Package Details:

1. 1 x Universal Battery Charger

2.4G Wireless Remote Flash Trigger for Nikon D300S D300 [ECAMR113]

:
Descirption:

This trigger features transmitter and receiver system built into one pocket-size unit.

Specifications:

• Features:
• The interlink triggering mode enables one Trigger Plus to receive and transmit signals at the same time.
• Smart transmitter and receiver built-in-one.
• Auto-sensing technology.
• Interlink triggering mode.
• Strobe, speedlight, and camera all controllable.
• Ultra-fast microchips enable sync speeds of 1/250sec.
• Reliable, long range and speedy.
• 
  
• Specifications:
• Type: 2.4G half duplex mode radio system
• Transmitter Distance: 100 meters (any angle for triggering both camera shutter and flash)
• Channel: 6 different channels
• Sync-speed: 1/250 sec
• Continuous Trigger Frequency: 8 frames/second
• Power Supply: 2 x 1.5V AAA battery (included)
• Compatibility With: Nikon D300S, D3X, D3, D700, D300, D200; Fujifilm S5 Pro, S3 Pro
• Product Size: 8.5 x 4.7 x 2.8cm (L x W x H)

Package Details:

1. 1 x Wireless Flash Trigger
2. 1 x Sync Cable
3. 1 x PC Cable
4. 1 x Convert Adapter
5. 2 x 1.5V AAA Batteries
6. 1 x User Manual

Aputure 160 Camera LED Video Light Bulb Hot Shoe [ECAMR105]

:
Descirption:

Aputure Amaran LED Video Light is the perfect continuous lighting solution for your HDSLR or video camera. It uses the latest LED technology, giving you great color and warm, soft lighting to enhance your subject matter.

Specifications:

• Features:
• High quality imported LED lights & IC technology.
• Special LED bulb layout design, small LED light beads scatter around, and big ones concentrate on center.
• 16:9 widescreen design & thin borders, light range is wider.
• With 4 extensing slots on the 4 sides, you can combine the lights together to achieve some effects.
• Brightness can be adjusted to your liking.
• Automatic IT circuit control.
• Stable color temperature & brightness.
• It can be easily connected to cameras by hot shoe.
• Low power consumption and high efficient output.
• Long lifespan (up to 50,000 hours).
• Multiple battery options (6xAA or Lithium).
• Battery power indicator.
• Eco-friendly and long work life.
• Light weight & compact size, it is ideal for travel.
• Professional & reliable.
• 
  
• Specifications:
• Color: Black
• LED Quantity: 160pcs
• Total Power:
• Voltage: 5.5-9V
• Color Temperature: 5600K
• Brightness Control: Color filters
• Battery: 6 x AA batteries (not included) or NP-F550, NP-FM55H, NP-FH60 battery (not included)
• Product Size: 15 x 9.7 x 5cm (L x W x H)
• Product Weight: 358g

Package Details:

1. 1 x LED Video Light
2. 1 x Hot Shoe Mount
3. 1 x Soft Filter
4. 1 x Orange Filter
5. 1 x Stand for Camera Flashlight
6. 1 x User Manual

YONGNUO Wireless Studio Flash Trigger RF-601/N for Nikon [ECAMR72]

:
Descirption:

This product uses global free 2.4GHz channel and FSK modulation system, with 15 selectable frequency channels and 1 universal channel, up to 1/250s flash sync speed, 100 meters maximum operating distance .

Specifications:

• Features:
• Using global free 2.4GHz channel and FSK modulation system, There's 15 selectable frequency channels and 1 universal channel.
• Flash sync speed is up to 1/250s.
• Compatible with Rf-602. It means you can use RF-602RX and RF-601TX in the same system which control by this transmitter.
• Supports to control multiple studio flash and hot-shoe flash at the same time.
• Maximum operating distance is up to 100 meters.
• Support the TTL flash speedlite wake-up function only when you use RF-602RX(receiver) (Wake-up can only used in TTL compatible flash).
• 
  
• Specifications:
• Color: Black
• Type: FSK 2.4GHz wireless flash trigger
• Transmitter Distance: 100M
• Max Sync Speed: 1/250s
• Channel: 15 different channels and all channels
• Release: Half-way press, Full-way Press
• Transmitter Terminal: PC 3-Pin input terminal
• Receiver Terminal: Yongnuo 3-pin output terminal
• Time of Shooting: Up to 20000 times (using CR2 Lithium battery)
• Receiver Stand-by Time: Up to 45 hours (using AAA battery, the battery is not included)

Package Details:

1. 1 x RF-601 Transmitter
2. 1 x RF-601 Receiver
3. 1 x CR2 Lithium Battery
4. 1 x 6.35mm-3.5mm Adapter

Wireless Flash Trigger PC Sync for Canon Nikon CTR-301P [ECAMR47]

:
Descirption:

This is a YONGNUO new version CTR-301P trigger set, It is very stable to trigger either off-camera flashes and studio strobes/monolights. Besides, it has two triggering ways: wireless triggering and optical triggering. Suitable for Canon, Nikon, Pentax, Olympus etc.

Specifications:

• Feature:
• Trigger the off-camera flashes and studio strobes/monolights perfectly.
• wireless triggering and optical triggering.
• Very stable, never misfires in our customers' experience. Up to 100 meter remote distance (Test it in 30m distance without interference, perfectly work), 1/250s sync speed (Tested on D300 + 580EXII, SB-800, perfectly work on 1/250s). CTR-301P is a very good flash trigger and it is very popular with photographers.
• This CTR-301P is an upgrade version of CTR-301.
• Replace the previous "TEST" button to the 2.5mm PC port. The receiver can be easily attached to the Off-camera flashes or studio strobes/moonlights with the 2.5mm-2.5mm or 2.5mm-6.35mm cables. Add a 1/4" screw hole on the receiver bottom, can be mounted on the 1/4" tripod bolt, or mounted on the umbrella bracket which has a 1/4" screw. This hole is very good to use.
• 
  
• Specifications:
• Brand: YONGNUO
• Model: CTR-301P
• Color: Black
• Operation Distance:
• Transmitter: >30m
• Receiver: >10m
• Frequency Channel: 4
• Operation Frequency: 433MHz
• Speed: 1/250s
• Power Source:
• Transmitter: 23A
• Receiver: 1 x CR2 3V Li-Ion battery
• Standby Output:
• Transmitter: 3uA
• Receiver: 0.9mA
• Product Weight: 60g

Package Details:

1. 1 x Transmitter
2. 1 x Receiver
3. 1 x PC Sync Cord
4. 1 x CR2 Battery
5. 1 x User Manual

Universal Travel Battery Charger for Ni-MH/Ni-CD/LIR123A/AA/AAA [ECAMR137]

:
Descirption:

This universal battery charger is powerful. It can charge Ni-MH, Ni-CD, 18650, 16340, 14500, LIR123A, AA, AAA, C, D batteries.

Specifications:

• Features:
• High quality with good performance.
• Slim and portable design.
• Designed to charge your batteries quickly and safely.
• Can adjust automatically when charge different batteries types.
• With a indicator light, when charging, it turns red. After finished, it turns green.
• After finish, it can stop charging intellectively.
• Suitable for charging Ni-MH, Ni-CD, 18650, 16340, 14500, LIR123A, AA, AAA, C, D batteries.
• Compact and lightweight, easy to carry.
• 
  
• Specifications:
• Input: AC100-240V/47-63HZ
• Output: 1.2V/370MA, 3.6V/320MA, 9V/120MA
• Plug Standard: EU
• Battery Quantity Per Charge: 1 piece
• Supported Battery Size: Length up to 69mm, Diameter up to 33mm
• Supported Battery Types:
• All kinds of 3.6/3.7V lithium batteries, such as LIR123A, 18650, 14500, 16340 and so on; all kinds of 1.2V MH-Ni batteries, such as D, C, AA, AAA, 9V batteries and so on
• Color: Black
• Product Size: 100 x 42 x 32mm (L x W x H)
• Product Weight: 46g

Package Details:

1. 1 x Universal Battery Charger

Stylish Bluetooth V2.1+EDR Handsfree Headset, 4-Hour Talk/4-Day Standby (Silver & Black) [EBEP004]

:
Descirption:

This is a high fashion design with distinct and minimalistic style, making the headset one of the most elegant and discreet Bluetooth devices on the market. It is of a stylish design with universal compatibility, noise suppression, echo elimination and duplex sound for crystal clear call quality. It is compatible with Motorola, Nokia, Samsung, Sony Ericsson, BlackBerry, LG or other Bluetooth cell phones.

Specifications:

• * Dimensions: 1.93 in x 1.69 in x 0.43 in (4.9 cm x 4.3 cm x 1.1 cm)
• * Weight: 0.35 oz. (10 g)
• * Color: Silver + Black
• * Material: Plastic + Aluminum alloy
• * Bluetooth V2.1 + EDR
• * Operation range up to 10 meters
• * Supports up to 2 cell phones at the same time
• * Talk time: approx. 4 hours
• * Standby time: approx. 4 days
• * Compatible with Motorola, Nokia, Samsung, Sony Ericsson, BlackBerry, LG or other Bluetooth Cell phones

Package Details:

1. 1 x Bluetooth headset
2. 1 x Power adapter (AC 110~240V/2-flat-pin plug/28cm-cable)
3. 1 x English/Chinese manual

CN-183 LED Camera Video Camcorder DV Lamp Light [ECAMR125]

:
Descirption:

This item contains 183 small LED lights. It can be easily connected to cameras or camcorders by a hot shoe. The built-in diffuser insures soft light. With a power box, the battery life is longer than the others.

Specifications:

• Features:
• Applicable for Camera/Video Camcorder/DV of all brands.
• Used for video taking, either for lights setup or supplement.
• Helps ensure your pictures' perfect settings.
• Made by high quality flash module, with a hot shoe lamp holder.
• The battery can support for up to four hours of use.
• Easy to know the battery capacity: press the test button, 4-LED On means battery full, 1-LED On means battery low.
• There are three filters included with this item, one white filter to soften the light (diffuse effect); one warm filter to reduce the color temperature and one pink filter.
• With on/off switch.
• Brightness adjustable.
• Hot shoe design can be attached to the video camcorders or digital cameras.
• Powerful lead-acid battery pack with a belt for more convenient use.
• Comes with a power charger.
• 
  
• Specification:
• LED Quantity: 183 pieces
• Color Temperature: 5400K
• Luminous Flux: 850 lm
• Power Watt: 11 watts
• Average Service Life: 50000 hours
• Powered By: Lead-Acid battery pack
• Capacity: 12V, 4AH
• Interface: 2 x DC 12V (connect to LED light directly with the provided connecting cable); 1 x input (connect to charger)
• Battery Charged By: Power charger
• Power charger Input: AC 100-240V, 50/60Hz, 0.6A
• Output: DC 14.7V, 1.5A
• Product Size: 141 x 150 x 62mm (L x W x H)
• Product Weight: 262g

Package Details:

1. 1 x LED Video Light
2. 1 x Battery Pack with a Belt
3. 1 x Charger
4. 1 x Power Cable
5. 3 x Filters (White, Purple and Yellow)

Lens Hood for Canon PowerShot SX30 SX20 SX10 IS LH-DC60 [ECAMR120]

:
Descirption:

This flower lens hood shades the lens from stray light, and improves your contrast and image quality; in inclement weather, it can assist in keeping moisture or wind-blown debris off the lens; and it protects the front barrel from the inevitable impacts against walls, door frames, and other real-life obstacles.

Specifications:

• Features:
• Prevents glare and lens flare caused by unwanted light.
• Jazzes up your photos with richer colors and deeper saturation.
• Flower shaped design reduces vignetting effect.
• Protects your lens from minor impact.
• Twist-lock mounting for extra security.
• Can be attached in the opposite direction for storage.
• The quality lens hood is made very solid and strong.
• 
  
• Specifications:
• Color: Black
• Material: ABS
• Compatible with: Canon PowerShot SX1IS, SX1 IS; Canon PowerShot SX10IS, SX10 IS; Canon PowerShot SX20IS, SX20 IS; Canon PowerShot SX30IS, SX30 IS
• Product Size: 69x25mm (D x H)
• Product Weight: 4g

Package Details:

1. 1 x Lens Hood for Canon

Mini Touch Screen Pen for iPhone4 iPhone3 [ETPEN015]

:
Descirption:

This product adopts the iPhone sleek design that is suitable for different touch screens. The earphone is designed as an adornment which is useful and good-looking. You will love it.

Specifications:

• Dimensions: 8cm
• Color: wine red, red, white, silver, green, blue, golden
• Compatible: iPhone3G, 3GS, 4G, iPod, iPad Touch

Package Details:

1. 1 x pen